Skip to main content

Před koupí softwaru si v aplikaci BudikStore ověřte že je vaše vozidlo podporováno a vše FUNGUJE

BudikStoreBudikStore

Supported vehicles & engines

750 mapped engines708 measured engines23 engine families3423 models

CJCDFully mapped
2.0 TDI · 110 kW · EA189 · 2014
CRLBFully mapped
2.0 TDI · 110 kW · EA288 · 2013–2016
CUAACompatible
2.0 BiTDI · 176 kW · EA288 · 2015–2020
CNHACompatible
2.0 TDI · 140 kW · EA288 · 2014–2016
CNHCCompatible
2.0 TDI · 140 kW · EA288 · 2014
CUNACompatible
2.0 TDI · 140 kW · EA288 · 2013–2017
CZJACompatible
2.0 TDI · 140 kW · EA288 · 2015
DDAACompatible
2.0 TDI · 140 kW · EA288 · 2015–2016
DDDACompatible
2.0 TDI · 140 kW · EA288 · 2017
DESACompatible
2.0 TDI · 140 kW · EA288 · 2016–2021
DETACompatible
2.0 TDI · 140 kW · EA288 · 2016–2020
DFCACompatible
2.0 TDI · 140 kW · EA288 · 2016–2017
DFHACompatible
2.0 TDI · 140 kW · EA288 · 2016–2020
CUPACompatible
2.0 TDI · 135 kW · EA288 · 2013–2016
CUWACompatible
2.0 TDI · 135 kW · EA288 · 2015–2016
CUXACompatible
2.0 TDI · 135 kW · EA288 · 2015
CYLACompatible
2.0 TDI · 135 kW · EA288 · 2015
DFMACompatible
2.0 TDI · 135 kW · EA288 · 2016–2017
DFUACompatible
2.0 TDI · 135 kW · EA288 · 2016
DGCACompatible
2.0 TDI · 135 kW · EA288 · 2017–2018
DJGACompatible
2.0 TDI · 135 kW · EA288 · 2018–2020
CFCACompatible
2.0 BiTDI · 132 kW · EA189 · 2010–2016
CNEACompatible
2.0 BiTDI · 132 kW · EA189 · 2012–2018
CNEBCompatible
2.0 BiTDI · 132 kW · EA189 · 2018
1–24 of 788
PreviousNext
What the support levels mean

Fully mapped

Fully supported and verified, all values including DPF state and regeneration (burn-off), soot (measured/calculated/limit), exhaust-gas temperatures, oil temperature, torque and selected gear.

Compatible

Same engine family and ECU as the mapped ones, full functionality (incl. DPF and regeneration) is expected. Final verification is done on the specific car.

Likely

Same ECU generation, very likely full support, but some values (e.g. exhaust temps on the 1.6 TDI) may be missing. We're happy to scan the car to be sure.

Standard OBD-II

Not scanned on the device yet. Standard OBD-II gives live values: RPM, speed, coolant temp, engine load, intake-air temp, MAF, throttle, manifold pressure (MAP) and boost, fuel and voltage, on newer diesels often also DPF and exhaust-gas temperature. Full soot, regeneration status and oil-temp reading are added once we scan your specific engine.

The gauge talks over CAN-bus (OBD-II). Standard live data works on vehicles with CAN-bus diagnostics, reliably from ~2008, and earlier on many brands (including VAG).

The engine codes listed here are not the full list. The software is matched to the engine family, so it handles codes that are not written out here. Find your four-character engine code in the registration document, compare the family, and if you are unsure, write to us and we will check it for you.